Furuno UAIS TRANPONDER FA-150 Operator's Manual page 43

1. OPERATION
5. Press the ENT key to show details.
6. POWER is selected; press the ENT key to show the channel power
options.
7. Select power desired then press the ENT key.
8. CH NO. CH-A is selected; press the ENT key.
9. Select channel number for CH-A then press the ENT key.
10. CH NO. CH-B is selected; press the ENT key.
11. Select channel number for CH-B then press the ENT key.
12. MODE CH-A is selected; press the ENT key.
13. Select desired mode for CH-A then press the ENT key.
Mode
CH-A
CH-B
14. MODE CH-B is selected; press the ENT key.
15. Select desired mode for CH-B then press the ENT key.
16. ZONE is selected; press the ENT key.
17. Key in the zone distance then press the ENT key. (The setting range is 1 to
8 (nm)).
18. Use ▼ or ▲ to show page 2 of the [EDIT CHANNEL] sub-menu.
19. LAT of RIGHT TOP is selected; press the ENT key. Enter latitude for the
right-top position (northeast point) of the AIS operating area then press the
ENT key.
1-32
[EDIT CHANNEL]
FROM MMSI: _ _ _ _ _ _ _ _ _
POWER : 12.5W
CH NO. CH-A: 2087
CH-B: 2088
MODE CH-A: TX/RX
CH-B: TX/RX
ZONE: 1NM
1W
12.5W
TX/RX
RX
UNUSED
1 2
TX/RX TX/RX
TX/RX RX
[EDIT CHANNEL]
CH AREA
RIGHT TOP
0 ° 00.0'N
LAT:
0 ° 00.0'E
LON:
LEFT BOTTOM
0 ° 00.0'N
LAT:
0 ° 00.0'E
LON:
1/2
3 4
RX RX
TX/RX RX
2/2
5 6
RX UNUSED
UNUSED RX