Dynamic Data - Furuno UAIS TRANPONDER FA-150 Operator's Manual

Uais tranponder
Hide thumbs Also See for UAIS TRANPONDER FA-150:
Table of Contents

Advertisement

2. INLAND AIS
2.5

Dynamic Data

The DYNAMIC DATA display shows your ship's dynamic data, which includes
date, time, ship's position, etc. To show these displays, press the DISP key
three times at the plotter display.
The Officer of the Watch should periodically check position, speed over ground
and sensor information for quality.
Date
Time
Latitude
Longitude
Speed over ground
Course over ground, Heading
Rate of turn
Update rate of dynamic ship information
Ship's dynamic conditions and nominal reporting interval
Ship's dynamic conditions
Ship at anchor and not moving faster than 3 kn
Ship at anchor and moving faster than 3 kn
Ship operating in SOLAS mode, moving 0-14 kn
Ship operating in SOLAS mode, moving 0-14 kn
speed and changing course
Ship operating in SOLAS mode, moving 14-23 kn
Ship operating in SOLAS mode, moving 14-23 kn
and changing course
Ship operating in SOLAS mode, moving faster
than 23 kn
Ship operating in SOLAS mode, moving faster
than 23 kn and changing course
Ship operating in inland waterway mode
2-10
[DYNAMIC DATA]
1/2
DATE: 10/APR/2008
TIME: 13:24:55 UTC
LAT : 51 ° 55.0213'N
4 ° 30.0012'E
LON :
SOG: 8.1kn
COG: 118.5 ° HDG:118 °
R10.3 ° /min*
ROT:
[DYNAMIC DATA]
2/2
SENSOR: EXTERNAL GPS
RAIM:
USED
POSITION ACCURACY
HIGH
DYNAMIC INFORMATION
REPORT RATE:
3.3SEC
BLUE SIGN:
YES
* If no ROT device is connected and HDG
sentence is input from a gyrocompass, etc.,
the following is displayed:
Rate of turn less than 10 ° /min.: 0.0
Rate of turn 10 ° /min. rightward or higher: R>10
Rate of turn 10 ° /min. leftward or higher: L>10
Navigator (EXTERNAL GPS, INTERNAL
GPS, EXTERNAL DGPS, INTERNAL DGPS, NO FIX)
Receiver Autonomous Integrity Monitoring
(USED or UNUSED)
Position accuracy (HIGH or LOW)
Report rate for dynamic information
Blue sign presence (YES or NO)
( "---" if BLUE SIGN on the INITIAL
SETTINGS menu is "NOT AVAILABLE", or
the SOLAS mode is in use.)
Nominal reporting interval
3 minutes
10 seconds
10 seconds
3 1/3 seconds
6 seconds
2 seconds
2 seconds
2 seconds
Assigned between 2 seconds
and 10 minutes

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents