Furuno FA-100 Operator's Manual

UAIS TRANSPONDER FA-100
The purpose of this Operator's Guide is to provide basic operating procedures for this equipment. For
more detailed information see the Operator's Manual.
Turning on and off
Press POWER key.
·
After self-test, the plotter display appears.
RNG: 1.50
Adjusting brilliance and contrast
1. Press CLR/ALT and SFT keys together.
BRILLIANCE
CONTRAST
ESC: [ENT]
2. Press ▲ or ▼ to adjust brilliance; ◄or ► to
adjust contrast.
3. Press ENT key.
Setting up for a voyage
Enter at the start of a voyage: draught,
destination, navigation, status, etc.
1. Press MENU, [5], and [1] key in that order.
[SET SHIP DATA]
DRAUGHT: 07.5 m
DTE : KEY & DISP
123
2. DRAUGHT is selected; enter ship's current
draught.
3. Press ENT, and then [2] key.
[SET DESTINATION]
DATE: 00/00 (DD/MM)
TIME: 00:00
DESTINATION:
NONE
4. Press NEXT to choose DATE, TIME or
DESTINATION and enter estimated date/time
of arrival or destination waypoint.
5. Press ENT, and then [3] key.
[SET STATUS]
NAV STATUS: 00
STATUS NAME
UNDER WAY USING
ENGINE (DEFAULT)
Operator's Guide
[- - - - - -]
SOG:
- - -.- kt
COG:
- - -.- deg
INTRD: 0
[ ]: FWD
n [ ]: BACK
m
+ -
6. Press ▲, ▼, ◄ or ► key to choose
appropriate navigation status.
7. Press ENT, and then [4] key.
[SET TYPE&CREW]
CREW
TYPE CLASS : A
TYPE NO.
TYPE NAME
8. CREW is selected; enter number of crews.
9. Press NEXT to choose TYPE NO. and press
arrow keys to choose appropriate type
number.
▲, ▼ : Increment, decrement by 1
◄, ► : Increment, decrement by 10
10. Press ENT and MENU in that order.
SAVE ?
YES
NO
CANCEL
11. YES is selected; enter ENT.
Setting CPA/TCPA
1. Press MENU, [5], and [5] key in that order.
[SET CPA/TCPA]
CPA:
TCPA:
ACTV:
2. Enter CPA and press NEXT.
3. Enter TCPA and press NEXT.
4. Press SFT to choose ENBL to activate the
CPA/TCPA alarm; DSBL to disable it.
5. Press ENT, MENU and ENT in that order.
Enabling/Disabling buzzer
1. Press MENU, [6] and [5] key in that order.
[SET BUZZER]
ALARM
CPA/TCPA : ON
MSG ALM : ON
2. Press SFT to choose ON or OFF for each item.
ALARM: for system trouble
CPA/TCPA: for CPA/TCPA alarm
MSG ALM: for incoming message
: 0012
+ -
: 0
0.90 nm
01 min
+ -
DSBL
+ -
: ON
+ -
+ -