Furuno FA-150 Installation Manual
  1. Manuals
  2. Brands
  3. Furuno Manuals
  4. Marine Radio
  5. FA-150
  6. Installation manual

Furuno FA-150 Installation Manual

U-ais transponder
Hide thumbs Also See for FA-150:
Table of Contents

Advertisement

Quick Links

See also: Operator's Manual , Installation Manual
Installation Manual
U-AIS TRANSPONDER
FA-150
Model
SAFETY INSTRUCTIONS ................................................................................................ i
SYSTEM CONFIGURATION ........................................................................................... ii
EQUIPMENT LISTS........................................................................................................ iii
1. MOUNTING..............................................................................................................1-1
1.1 Antenna Units ....................................................................................................................1-1
1.2 Monitor Unit........................................................................................................................1-7
1.3 UAIS Transponder .............................................................................................................1-9
1.4 Power Supply (option)......................................................................................................1-10
1.5 Pilot Plug (option).............................................................................................................1-10
2. WIRING....................................................................................................................2-1
2.1 Connection.........................................................................................................................2-1
2.2 Changing Ship's Mains Specifications ...............................................................................2-4
3. SETTING AND ADJUSTMENT ...............................................................................3-1
3.1 Inland AIS Specific Settings...............................................................................................3-1
3.2 How to Set MMSI, IMO No., Name and Call Sign..............................................................3-4
3.3 How to Set GPS Antenna Position.....................................................................................3-5
3.4 How to Set Ship Type ........................................................................................................3-6
3.5 How to Set I/O Port ............................................................................................................3-6
3.6 How to Set Long Range Channel ....................................................................................3-10
4. ATTACHING LAN KIT (OPTION)............................................................................4-1
5. IEC 61162-1/2 DATA SENTENCES ........................................................................5-1
APPENDIX 1 JIS CABLE GUIDE .............................................................................AP-1
PACKING LISTS ......................................................................................................... A-1
OUTLINE DRAWINGS ................................................................................................ D-1
INTERCONNECTION DIAGRAM ................................................................................ S-1
www.furuno.com
All brand and product names are trademarks, registered trademarks or service marks of their respective holders.

Advertisement

Table of Contents
loading

Related Manuals for Furuno FA-150

Summary of Contents for Furuno FA-150

  • Page 1: Table Of Contents

    Installation Manual U-AIS TRANSPONDER FA-150 Model SAFETY INSTRUCTIONS ....................i SYSTEM CONFIGURATION ................... ii EQUIPMENT LISTS......................iii 1. MOUNTING......................1-1 1.1 Antenna Units ........................1-1 1.2 Monitor Unit........................1-7 1.3 UAIS Transponder ......................1-9 1.4 Power Supply (option)......................1-10 1.5 Pilot Plug (option)......................1-10 2. WIRING........................2-1 2.1 Connection.........................2-1...
  • Page 2 ・FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya, 662-8580, JAPAN A : NOV 2004 Printed in Japan All rights reserved. K : SEP . 09, 2015 Pub. No. IME-44310-K ( AKMU ) FA-150 0 0 0 1 5 0 0 8 3 1 9...

  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS The installer must read the safety instructions before attempting to install this equipment. Indicates a potentially hazardous situation which, if not avoided, WARNING could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, CAUTION can result in minor or moderate injury.

  • Page 4: System Configuration

    GPA-017S GVA-100 Distributor unit MONITOR UNIT DB-1 FA-1502 UNIVERSAL AIS MENU DISP STATUS FA-150 12-24 VDC UAIS TRANSPONDER FA-1501 External display, NAVNET2, Pilot plug unit Sensor Alarm system PC, BEACON RECEIVER Blue Sign Power supply PR-240 : Standard...

  • Page 5: Equipment Lists

    EQUIPMENT LISTS Standard supply Name Type Code no. Remarks UAIS Transponder FA-1501 — Monitor Unit FA-1502 — GSC-001 — GPS Antenna GPA-017S — Select one. GPS/VHF GVA-100 — Combined Antenna Distributor Unit DB-1 000-010-591 Installation MJ-A10SPF0012- Cable for FA-1501 001-122-900-10 Materials 050+ CP24-00501...
  • Page 6 EQUIPMENT LISTS Optional supply Name Type Code no. Remarks Monitor unit FA-1502 — Antenna cable CP20-02700 004-381-160 8D-FB-CV(30m)+CP20-02701 CP20-02720 001-207-990 8D-FB-CV(40m)+CP20-02701 CP20-02710 004-381-170 8D-FB-CV(50m)+CP20-02701 Antenna cable CP24-00300 000-041-938 8D-FB-CV(30m)+CP24-00301 CP24-00320 000-022-637 8D-FB-CV(40m)+CP24-00301 CP24-00310 000-041-939 8D-FB-CV(50m)+CP24-00301 Coaxial cable TNC-PS/PS-3D-L15M-R 000-133-670-12 TNC-TNC, 15m Mast mount fix- CP20-01111 004-365-780...

  • Page 7: Mounting

    MOUNTING NOTICE Do not apply paint, anti-corrosive sealant or contact spray to coating or plastic parts of the equipment. Those items contain organic solvents that can damage coating and plastic parts, especially plastic connectors. Antenna Units 1.1.1 GPS antenna unit Install the GPS antenna unit referring to the drawing on page D-5 or D-6 at the back of this manual.
  • Page 8 1. MOUNTING c) Cable type RG-10/UY (shipyard supply) Note: The length of this cable should be less than 20 m to prevent signal loss. The coax. coupling cable assy.(type: NJ-TP+3DXV-1, code no. 000-123-809-10), co- axial connector (N-P-8DFB; supplied), vulcanizing tape and vinyl tape are re- quired.

  • Page 9: Vhf Antenna

    • Install the VHF whip antenna referring to the outline drawing at the back of this man- ual. Separate this antenna from other VHF radiotelephone antennas as shown on the next page to prevent interference to the FA-150. <Horizontal separation distance>...
  • Page 10 1. MOUNTING When coaxial cable RG-10/UY (shipyard supply) is used, attach the coaxial plug M-P- 7 (dockyard supply) as shown below. How to attach the plug M-P-7 Lay the coaxial cable and attach an M- 30 mm type plug (if necessary) to the cable as Sheath follows.
  • Page 11 1. MOUNTING Mounting procedure 1. Dismount the bottom cover, cut the cable-tie inside the unit and take out the co- axial connector attached to the combined box. 2. Loosen four screws to loosen whip antenna fixture and pull out the coaxial con- nector coming from the combined box through the hole in the whip antenna fixture.
  • Page 12 1. MOUNTING How to install distributor unit DB-1 The length of the cable between the distributor unit and transponder unit is 1 m so lo- cate the distributor unit within 1 m from the transponder unit. Fix the distributor unit on the bulkhead, facing the cable entrance downward.

  • Page 13: Monitor Unit

    1. MOUNTING Monitor Unit The monitor unit can be installed on a desktop or flush mounted in a panel. Install it on the chart table or near the steering place, referring to the outline drawing. When selecting a mounting location for the monitor unit, keep the following in mind: •...
  • Page 14 1. MOUNTING F type Use the optional flush mount kit OP20-29. Name Type Code No. Cosmetic panel 20-016-1051 100-251-370-10 Self-tapping screw 5×20 000-162-609-10 Hexagon-head bolt M6×12 000-162-897-10 Spring washer 000-158-855-10 Prepare a cutout in the mounting location whose dimensions are 183 (W) x 92 (H) 2.

  • Page 15: Uais Transponder

    1. MOUNTING UAIS Transponder Mount the transponder, where it is protected from rain and water splash. This unit can be installed on a bulkhead. Install it, referring to the outline drawing. When selecting a mounting location for the transponder, keep the following in mind: •...

  • Page 16: Power Supply (Option)

    1. MOUNTING Power Supply (option) When selecting a mounting location for the unit, keep the following in mind: • Keep the unit out away from areas subject to water splash. • Locate the unit away from exhaust pipes and vents. •...

  • Page 17: Wiring

    WIRING Connection Connect the equipment, referring to the interconnection diagram at the back this man- ual. GPS Antenna GSC-001 or GPS/VHF Conbined Antenna GVA-100 GPS-017S 150M-W2VN or FAB-151D Either one 0.6 m Distributor unit*** 0.8 m DB-1 RG-10U/Y Attached to Distributor RG-10U/Y (approx.
  • Page 18 2. WIRING COM1: Long range communica- tion device (Inmarsat C, EXT ALM: Connect ship's alarm system. EXT ALM: Connect ship's alarm system. etc.) or External display (Radar, ECDIS, Pilotplug) DISP: Connect the monitor unit. DISP: Connect the monitor unit. COM2 & External display, NAVNET COM3: 2, Pilot plug...
  • Page 19 (FA-150 is one longest cable among the listeners. of the listeners.) *: When the FA-150 is equipment connected with the lon- gest cable, jumper between terminal #7 and #8 of COM1-6 port. Note: Do not set the termination on the equipment other than the connected equipment with the longest cable.

  • Page 20: Changing Ship's Mains Specifications

    2. WIRING Changing Ship’s Mains Specifications The AC-DC power supply PR-240 is shipped ready for connection to a 200-230 VAC ship’s mains. If the ship’s mains is 100 VAC-115 VAC, change the tap connection and terminal board connection as below. Attach label supplied as accessories to the front panel according to the ship’s mains.

  • Page 21: Setting And Adjustment

    SETTING AND ADJUSTMENT After installing the equipment, set up the own ship’s static information (MMSI, IMO number, ship’s name, call sign, type of ship and GPS antenna position). Also, set up the I/O ports. Inland AIS Specific Settings This section shows how to activate and set up the Inland AIS feature. (If you do not require this feature, go to section 3.2.) The installer obtains the AIS activation key from the place of purchase.
  • Page 22 3. SETTING AND ADJUSTMENT How to select AIS mode The Inland AIS has two operating modes: Inland (inland waterways) and SOLAS (SO- LAS compliant class A AIS transponder). Select INLAND AIS mode as follows: 1. Press the NAV STATUS key to open the [NAV STATUS] menu. [NAV STATUS] NAV STATUS: AIS MODE:...
  • Page 23 3. SETTING AND ADJUSTMENT 3. Enter the password to show the I[NITIAL SETTINGS] menu. Note that the pass- word is known by only the FURUNO dealer. [INITIAL SETTINGS] SET MMSI SET MMSI SET INT ANT POSN *: Availability depends on SET EXT ANT POSN equipment specifications.

  • Page 24: How To Set Mmsi, Imo No., Name And Call Sign

    3. SETTING AND ADJUSTMENT How to Set MMSI, IMO No., Name and Call Sign 1. Display the [INITIAL SETTINGS] menu referring to step 1 tostep 3 in "How to set blue sign status" on page 2. [INITIAL SETTINGS] SET MMSI SET MMSI SET INT ANT POSN *: Availability depends on...

  • Page 25: How To Set Gps Antenna Position

    QUIT[MENU] 3. Press the ENT key again. 4. Use the cursor pad to enter the distance for “A” of the FA-150 GPS antenna then press the ENT key. A: Distance from bow to GPS antenna position, setting range: 0-511 m 5.

  • Page 26: How To Set Ship Type

    3. SETTING AND ADJUSTMENT How to Set Ship Type 1. In the [INITIAL SETTINGS] window, press the  or  key to choose the [SET SHIP TYPE] and press the ENT key. [SET SHIP TYPE] TYPE NO : * * * * TYPE DETAIL * * * * NOT AVAILABLE QUIT [MENU] 2.
  • Page 27 3. SETTING AND ADJUSTMENT 4. Press the ENT key to display the COM1 setting window. [SET COM1] MODE : LONG RANGE SPEED: IEC 61162-2 QUIT [MENU] 5. Press the ENT key again to display the [MODE] setting window. [SET COM1] MODE : LONG RANGE SPEED:...
  • Page 28 [SENSOR]: GPS, Gyrocompass, Speedlog, ROT, etc. [HI LEVEL IF]: NAVNET 2 [STANDARD] (PC port): PC for inputting NMEA data (Same data as EXT DISPLAY). [MONITOR] (PC port): PC having the FURUNO software FAISPC MK-2. [SERVICE] (PC port): Service use FAISPC MK-2-equipped PC.
  • Page 29 3. SETTING AND ADJUSTMENT Priority setup 1. Press  or  to choose [SET PRIORITY] at the [SET PRIORITY] [SET I/O PORT] sub-menu and press the ENT key. L/L, COG, SOG The [PRIORITY] menu appears. QUIT [MENU] 2. [L/L, COG, SOG] is selected; press the ENT key. [SET L/L, COG, SOG] COM4: COM5: 2...

  • Page 30: How To Set Long Range Channel

    3. SETTING AND ADJUSTMENT How to Set Long Range Channel Set the channel to use to send your position to a satellite in an AIS message. 1. In the [INITIAL SETTINGS] window, press  or  key to choose the [SET LR CH] and press the ENT key.

  • Page 31: Attaching Lan Kit (Option)

    ATTACHING LAN KIT (OPTION) To connect to PC network or NAVNET 3D network, the optional LAN kit is required. LAN kit (Type: OP24-8, Code: 005-956-020) Name Code no. Remark NET100 board 001-099-710 03P9332 Hex. spacer 000-159-292-10 How to attach the LAN kit 1.
  • Page 32 4. ATTACHING LAN KIT (OPTION) 5. Press the ENT key, enter IP address in the IP ADDRESS field and press the ENT key. (Setting range: 000.000.000.000 to 255.255.255.255) Choose digit with  or ; set value with  or . 6.

  • Page 33: Iec 61162-1/2 Data Sentences

    IEC 61162-1/2 DATA SENTENCES IEC 61162-1/2 format data is input or output from the data port COM1-COM6. The ta- ble below shows the input/output data specifications. Transponder Port Menu setting Input/Output Data format COM1 LONG RANGE Input/Output* IEC61162-2 (38.4kbps)/ IEC61162-1 (4800bps) EXT DISPLAY Input/Output* IEC61162-2 (38.4kbps)/...
  • Page 34 5. IEC 61162-1/2 DATA SENTENCES Output data/Sentences Sentence (Priority) Contents AIABK UAIS addressed and binary broadcast acknowledgment AIACA AIS regional channel assignment message AIACS Channel management information source AIALC Cyclic alert list AIALF Alert sentence AIALR Set alarm state AIARC Alert command refused AIHBT Heart beat supervision...

  • Page 35: Appendix 1 Jis Cable Guide

    EX: TTYCYSLA - 4 MPYC - 4 TTYCSLA-4 Designation type Designation type # of cores # of twisted pairs The following reference table lists gives the measurements of JIS cables commonly used with Furuno products: Cable Core Core Cable Diameter Type...
  • Page 42 Y. Hatai...
  • Page 43 Mar,27'07 R.Esumi...
  • Page 44 May 20 '03...
  • Page 45 D - 7 Feb.22'05...
  • Page 46 D - 8...
  • Page 48 D-10 Nov.28'03...
  • Page 49 D-11 27/Aug/2015 H.MAKI...
  • Page 50 D-12...
  • Page 51 D-13...

  • Page 52: Interconnection Diagram

    ＊６）使用しない芯線は絶縁する。 ALM_B (NORMAL CLOSE) TTYCS-1Q,MAX.100m ALARM SYSTEM ALM_C NOTE: ACK_H *1: SHIPYARD SUPPLY ACK_C *2: OPTION DRAWN TYPE FA-150 T.YAMASAKI 12/Dec/2012 *3: ADD JUMPER WHEN USING IEC61162-2. CHECKED 名前 国際船舶自動識別装置 H.MAKI IV-2sq. 12/Dec/2012 *4: PRODUCED BY AMP INC. APPROVED 相互結線図...

Table of Contents