Entering Voyage-Related Data - Furuno UAIS TRANPONDER FA-150 Operator's Manual

1.5

Entering Voyage-Related Data

There are six items on the NAV STATUS menu that you will need to enter at
the start of a voyage.
• Navigation status
• Destination
1. Press the NAV STATUS key to open the NAV STATUS menu.
2. If your navigation status is different from that shown, follow the procedure
below. If it is the same as shown, go to step 3.
a) Press the ENT key.
b) Press ▲ or ▼ to select appropriate status then press the ENT key. Refer
to the data below to select appropriate nav status.
00:
01:
02:
03:
04:
05:
06:
07:
08:
09:
10:
11:
12:
13:
14:
15:
3. Press ► to show the DESTINATION sub-menu.
• Cargo type
• No. of persons
UNDER WAY USING ENGINE
AT ANCHOR
NOT UNDER COMMAND
RESTRICTED MANEUVERABILITY
CONSTRAINED BY HER DRAUGHT
MOORED
AGROUND
ENGAGED IN FISHING-TRAWLING
UNDER WAY SAILING
ENGAGED IN FISHING OTHER THAN TRAWLING
AIR-CUSHION VESSEL IN NON-DISPLACEMENT MODE OR WIG
CRAFT TAKING OFF, LANDING OR IN FLIGHT
POWER-DRIVEN VESSEL TOWING ASTERN
POWER-DRIVEN VESSEL PUSHING AHEAD OR TOWING
ALONGSIDE
IN DISTRESS OR REQUIRING ASSISTANCE
AIS-SART (ACTIVE), SEEKING TO ATTRACT ATTENTION*
* Input not possible. "ERROR REGIST PRESS ANY KEY" appears.
NOT DEFINED (DEFAULT), AIS-SART (TEST)
1. OPERATION
• Arrival time
• Draught
1-7