Furuno UAIS TRANPONDER FA-150 Operator's Manual page 91

APPENDIX
(Continued from previous page)
CHANNEL
VIEW CHANNEL (View power and channel settings of channel in use.)
SETTINGS
EDIT CHANNEL
DIAG-
MONITOR TEST (Displays PROG NO. and BOOT NO.; checks ROM, RAM, LCD, controls.)
NOSTICS
TRANSPONDER
TEST
PWR ON/OFF HISTORY (Log for time of equipment power on and off.)
TX ON/OFF HISTORY (Log for time of equipment transmission on and off.)
MEMORY CLEAR
ACTIVATE KEY (DEVICE ID, KEY[ACTIVATED])
FOR SERVICE (For service technician. Not accessible by user.)
[NAV STATUS] NAV STATUS (00-15)
key
DESTINATION
ARRIVAL TIME
CARGO TYPE (10-99)
DRAUGHT&PERSONS
AP-2
SELECT NO. (0-9)
TIME (UTC)
FROM MMSI (HIGH SEA, MMSI, EMPTY)
TYPE (HIGH SEA, AIS, PI, DSC,
MANUAL, EMPTY)
FROM MMSI
POWER (1W, 12.5W)
CH NO.
MODE
ZONE (1-8 (NM)
CH AREA
MEMORY TEST (Displays PROGRAM NO.;
checks ROM, RAM, and MOT HW.)
GPS TEST (Display PROGRAM NO. and checks internal GPS receiver.)
MONITOR CLEAR (YES, NO)
SET USER DEFAULT (YES, NO)
GPS COLD START (YES, NO)
SELECT
EDIT
DELETE
DATE
TIME
DRAUGHT (0-25.5(m))
NO. OF PERSONS (0-8191)
Press [ENT] key to display.
CH-A, CH-B
CH-A, CH-B
RIGHT TOP
LAT
LON
LEFT BOTTOM
LAT
LON