Furuno UAIS TRANPONDER FA-150 Operator's Manual page 39

1. OPERATION
5. To view the contents of a message, select the message then press the ENT
key. Below is an example of a received message.
6. Press the DISP key to close the log.
Automatically displaying incoming messages
You can display incoming messages automatically as follows:
1. Press the MENU key to open the menu.
2. Select USER SETTINGS then press the ENT key.
3. Select RECEIVED MSG, then press the ENT key.
4. Select POPUP, then press the ENT key
5. Select which category of receive message to
display automatically then press the ENT key.
ALL: Display any message upon receipt.
ABM: Display only addressed binary messages, upon their receipt.
OFF: Disable automatic displaying of incoming messages.
6. To get an audio alert when the message type selected at step 5 is received,
set "BUZZER" to ON.
7. Press the DISP key to close the menu.
1-28
[RX ADDRESSED MSG]*
I HAVE CHANGED MY
COURSE TO 350 DEGREE.
QUIT[MENU]
*RX BROADCAST MSG for
received broadcast message
[USER SETTINGS]
KEY BEEP : ON
ALARM BUZZER : ON
AUTO SORT : ON
DISP SART TEST : ON
LR MODE : AUTO
RECEIVED MSG
CPA/TCPA ALARM
[RECEIVED MSG]
POPUP : ALL
BUZZER : ON
ALL
ABM
OFF