Furuno UAIS TRANPONDER FA-150 Operator's Manual page 19

1. OPERATION
4. NEW is selected; press the ENT key.
NAV STATUS menu, DESTINATION sub-menu, destination input
5. Press the ENT key. Enter destination then press the ENT key. You can use
up to 20 alphanumeric characters (\, ^, !, ,, $, and * count as three
characters), and enter 20 destinations. (For how to enter alphanumeric
characters, see "Entering alphanumeric data" on page 1-6.)
If you have already registered some destinations, the DESTINATION
sub-menu looks something like the one below. From this screen you can
select, edit or delete destinations.
1) Select appropriate destination then press the ENT key to show the options
2) Select SELECT, EDIT or DELETE as appropriate then press the ENT key.
1-8
[DESTINATION]
ENTER A NEW
QUIT:[NAV STATUS]
PROCESSING DESTINATIONS
[DESTINATION]
COTE D'IVOIRE
(0/3)
*************
[NEW?]
COTE D'IVOIRE
SAN FRANCISCO
SEATTLE
window below.
SELECT
EDIT
DELETE
Do one of the following according to your objective.
SELECT: Select a destination.
EDIT: Press the ENT key twice then edit the destination.
DELETE: The prompt below appears. Press
YES; press the ENT key.
DESTINATION DELETE.
ARE YOU SURE?
YES NO
DESTINATION
Current destination
Destination list
to select