Furuno UAIS TRANPONDER FA-150 Operator's Manual page 93

APPENDIX
(Continued from previous page)
CHANNEL
VIEW CHANNEL (View power and channel settings of channel in use.)
SETTINGS
EDIT CHANNEL
DIAG-
MONITOR TEST (Displays program no.; checks ROM, RAM, LCD, controls.)
NOSTICS
TRANSPONDER
TEST
PWR ON/OFF HISTORY (Log for time of equipment power on and off.)
TX ON/OFF HISTORY (Log for time of equipment transmission on and off.)
MEMORY CLEAR
ACTIVATE KEY [DEVICE ID, KEY[ACTIVATED])
FOR SERVICE (For service technician. Not accessible by user.)
[NAV STATUS] NAV STATUS (00-15)
key
AIS MODE (SOLAS, INLAND)
DESTINATION
ARRIVAL TIME
DRAUGHT (SOLAS DRAUGHT (0-25.5m), INLAND DRAUGHT (0.01-20.00m))
CARGO TYPE (10-99)
ERI CODE
NO. OF PERSONS (CREW (0-254), PASSENGER (0-8190),
SHIPBOARD PERSONNEL (0-254), NO. OF PERSONS (0-8191))
LENGTH&BEAM (LENGTH (0.0-800.0m) BEAM (0.0-100.0m))
OTHER
AP-4
Press [ENT] key to display.
SELECT NO. (0-9)
TIME
FROM MMSI (HIGH SEA, MMSI, EMPTY)
TYPE (HIGH SEA, AIS, PI, DSC,
MANUAL, EMPTY)
FROM MMSI
POWER (1W, 12.5W)
CH NO. CH-A, CH-B
MODE CH-A, CH-B
ZONE (1-8 (NM)
CH AREA
RIGHT TOP
LEFT BOTTOM
MEMORY TEST (Displays PROG NO.;
checks ROM, RAM, and MOT HW.)
GPS TEST (Display PROGRAM NO. and checks internal GPS receiver.)
MONITOR CLEAR (YES, NO)
SET USER DEFAULT (YES, NO)
GPS COLD START (YES, NO)
SELECT
EDIT
DELETE
DYNAMIC INFORMATION RATE (AUTO, 10sec, 5sec, 2sec)
HAZARDOUS CARGO (NUMBER OF CONES 0-3, B-FLAG, UNKNOWN)
UN/LOADED (UNLOADED, LOADED, UNKNOWN)
LAT
LON
LAT
LON