How To Select A Menu Option; How To Enter Numeric Data; How To Use The Software Keyboard For Alphanumeric Input - Furuno FA-170 Operator's Manual

1. OPERATION
1.5.2

How to select a menu option

The procedure below shows how to select an option from a menu.
1) A window showing the options for the item selected is overlaid on the sub-menu.
For example, the options for [KEY BEEP] are as shown below.
USER SET
KEY BEEP
1
2 TIME DIFF
3 AUTO SORT
4
SART TEST
5
LONG RANGE SET
6 NOTIFICATION SET
ACTIVATE
7
2) Press
1.5.3

How to enter numeric data

The procedure below shows how to enter numeric data.
Cursor position
is highlighted.
1) Select the appropriate numeric character. Press
cyclically in ascending order. Press
descending order.
2) Press
3) Repeat steps 1) and 2) to finish entering data.
4) After entering all data, press the ENT/ACK key to register input.
1.5.4

How to use the software keyboard for alphanumeric input

The software keyboard appears when alphanumeric input is possible. Software key-
board operation requires the use of the Cursorpad and the ENT/ACK key.
Cursor position is
shown as a blue bar.
Current selection is highlighted in blue.
1. Referring to the figure above, press the arrow keys to select a character or key-
board operation.
2. Press the ENT/ACK key to confirm your selection.
3. Repeat steps 1 and 2 to complete the alphanumeric input.
4. Select [SET], then press the ENT/ACK key.
1-6
: ON
+00:00
:
ON
: ON
OFF
:
HIDE
or to select option desired, then press the ENT/ACK key.
TEST TARGET MMSI
000000000
or to shift the cursor.
Total characters input
No. of characters
before cursor
Options
window
to display numeric characters
to display numeric characters cyclically in
Maximum characters allowed
Keyboard operation keys
Backspace - Erase the character to the
left of the cursor.
Delete - Erase the character to the right
of the cursor.
Cursor locators - Press ► to move the
cursor right, ◄ to move the cursor left.
SET - Apply the changes.