Setting Up For A Voyage - Furuno FA-100 Operator's Manual

1.5

Setting Up for a Voyage

There are five items on the INIT SETTINGS menu (Menu #5) you will need to
enter at the start of a voyage: draught, destination, navigation status, ship type
and number of crew.
1. Press the [MENU] key to open the main menu.
2. Press the [5] key to open the INIT SETTINGS menu.
3. Press the [1] key to choose SET SHIP DATA. The ship's name and call sign
have been entered at installation. Confirm that they are correct.
4. Press the [NEXT] key to choose DRUGHT (draught).
5. Use the numeric keys to enter ship's current draught for the voyage. (Be
sure to amend it if it changes during the voyage.)
Note: DTE should not be changed from "KEY & DISP."
6. Press the [ENT] key to register data and return to the INIT SETTINGS
menu.
7. Press the [2] key to choose SET DESTINATION.
8. DATE is selected; enter estimated day and month of arrival at destination
and then press the [NEXT] key to choose TIME.
9. Enter estimated time of arrival at destination and then press the [NEXT] key
to choose DESTINATION.
[INIT SETTINGS]
1 SET SHIP DATA
2 SET DESTINATION
3 SET NAV STATUS
4 SET TYPE&CREW
5 SET CPA/TCPA
6 SET ANTENNA POS
INIT SETTING sub-menu
[SET SHIP DATA]
NAME : FURUNO
C. SIGN : 6LCZ43B
DRUGHT : 12.3 m
DTE : KEY & DISP
123
SET SHIP DATA sub-menu
[SET DESTINATION]
DATE: 00/00 (DD/MM)
TIME: 00:00
DESTINATION:
Dialog box for entry of destination
1 OPERATION
+ -
7