Agilent Technologies 6000 Series User Manual page 192

5 Making Measurements
192
The following example shows a delay measurement between the
rising edge of channel 1 and the rising edge of channel 2.
Figure 33
Phase
Phase is the calculated phase shift from source 1 to source 2,
expressed in degrees. Negative phase shift values indicate that
the rising edge of source 1 occurred after the rising edge of
source 2.
Phase =
Source 1
Source 2
Delay Measurement
Delay
---------------------------------------- - X 360
Source 1 Period
Period
Delay
6000 Series Oscilloscope User's Guide