Front-Panel Overview - Agilent Technologies 6000 Series User Manual

2 Front-Panel Controls

Front-Panel Overview

N O T E
32
This chapter provides an introduction to the front-panel
controls of the Agilent 6000 Series oscilloscope. Generally, you
set up the front-panel controls and then make a measurement.
The keys on the front panel bring up softkey menus on the
display that provide access to oscilloscope features. Many
softkeys use the Entry knob
Six softkeys are located below the display. To understand the
symbols used in the softkey menus and throughout this guide,
see "Conventions" on page 33.
Note that the Digital Select key, not the Entry knob, is used to
select digital channels when you want to reposition a digital
channel waveform.
The simplest way to set up the oscilloscope is to connect it to the signals
of interest and press the Autoscale key.
to select values.
6000 Series Oscilloscope User's Guide