Agilent Technologies 6000 Series User Manual page 36

2 Front-Panel Controls
36
7. Channel On/Off Key
off, or to access the channel's menu in the softkeys. There is one
Channel On/Off key for each channel. See
channels" on page 48.
8. Math Key
The Math key provides access to FFT (Fast Fourier
Transform), multiply, subtract, differentiate, and integrate
functions. See "Math Functions"
9. Vertical Sensitivity
sensitivity (gain) of the channel. See
channels" on page 48.
10. AutoProbe Interface
models.) When you connect a probe to the oscilloscope, the
AutoProbe Interface attempts to determine the type of probe
and set its parameters in the Probe menu accordingly. See
page 46. Note: Although the 100 MHz models lack the AutoProbe
interface, they do have a probe sense ring around the BNC.
Therefore, the probe attenuation factor will be automatically set
when you connect a compatible probe such as the 10073C or
10074C.
11. Channel Input BNC Connector
or BNC cable to the BNC connector. This is the channel's input
connector.
12. Label Key
Press this key to access the Label menu, which
lets you enter labels to identify each trace on the oscilloscope
display. See page 61.
13. File Keys
Press the File key to access file functions such as
save or recall a waveform or setup. Or press the Quick Print key
to print the waveform from the display. See
recalling traces and setups"
14. Utility Key
Press this key to access the Utility menu, which
lets you configure the oscilloscope's I/O settings, printer
configuration, file explorer, service menu, and other options.
Use this key to switch the channel on or
on page 159.
Use this knob to change the vertical
"Using the analog
(Not available on 100 MHz bandwidth
Attach the oscilloscope probe
on page 255.
6000 Series Oscilloscope User's Guide
"Using the analog
"Saving and