File Operation; Storage Device Operation; Setting The Prompt Mode Of The File System - 3Com 7700 Configuration Manual

2 C 11: S
HAPTER YSTEM

File Operation

Storage Device
Operation
Setting the Prompt
Mode of the File System
Example: File System
Operation
M
ANAGEMENT
Table 1 Directory Operation
Operation
Change the current directory
The file system can be used to delete or undelete a file or permanently delete a
file. It can also be used to display file contents, rename, copy and move a file and
display the information about a specified file. You can use the commands in
Table 2 to perform file operations.
Perform the following configuration in user view.
Table 2 File Operation
Operation
Delete a file
Undelete a file
Delete a file from the recycle bin
permanently
View contents of a file
Rename a file
Copy a file
Move a file
Display the information about
directories or files
The file system can be used to format a specified memory device. You can use the
command in Table 3 to format a specified memory device.
Perform the following configuration in user view.
Table 3 Storage Device Operation
Operation
Format the storage device
The command in Table 4 can be used for setting the prompt mode of the current
file system.
Perform the following configuration in system view.
Table 4 File System Operation
Operation
Set the file system prompt mode.
1 Format the flash.
<SW7700> format flash:
All sectors will be erased, proceed? [confirm]y
Format flash: completed
Command
cd directory
Command
delete file-url
undelete file-url
reset recycle-binfile-url
more file-url
rename fileurl-source fileurl-dest
copy fileurl-source fileurl-dest
move fileurl-source fileurl-dest
dir [ / all ] [ file-url ]
Command
format filesystem
Command
file prompt { alert | quiet }