20 Ma Analog Output (Op-07) - AND Weighing Indicator AD-4406 OP03 Instruction Manual

16.

4-20 mA Analog Output (OP-07)

The OP-07 analog output option is for sending the weight data to an analog input unit.
The output is a 4 mA to 20 mA current output proportional to the display reading.
The output data is updated in synchronization with the display update.
Specifications
Output current
Load resistance 0 to 510 Ω
Resolution
Output terminal
Accessory
* When set to a non-weight display (Calibration,
F-settings etc.), the output current is 4 mA.
The output current is not adjustable.
Settings
Set F30 of the F-Functions to 1, and set F31, F32 and F33.
Data F30
output
Data output
Analog F31
output Output data
F32
Weight value at 4 mA
F33
Weight value at 20 mA
Settings of F32 and F33
When entering the F32 or F33 settings (press the
ENTER key when "32" or "33" is blinking), the setting
value is displayed. Select the blinking digit by pressing
the key and increase the value by pressing the
1 key. By pressing the +/- key, the polarity of the
value can be alternated. Press the ENTER key to
store the setting value into memory. After this the
display returns to selection of the Function number.
AD-4406 Weighing Indicator
4 mA to 20 mA *
Approx. 1/10000
Connector terminal
Connector terminal (1) TM-MSTB03STF
AC adapter (1)
Note: Please confirm that the AC adapter type is correct
Item Parameter
(Initial setting is 10000)
Page 55
Non-linearity
Temperature
ZERO
coefficient
SPAN
No.1 : + No.2 : - No.3 : FG (Earth)
for your local voltage and receptacle type.
+
DC
DC 7V - 10V
AC adapter Jack
* 0 No output
1 Analog output
2 Serial in/out 1
3 Serial in/out 2
* 0 Displayed value
1 Gross weight
2 Net weight
-999999 to 999999
(Initial setting is 0)
-999999 to 999999
Less than +/- 0.1% fs
Less than +/- 0.02% fs/C
Less than +/- 0.02% fs/C
-
1 2
+ -
Analog output terminal
Remarks
Initial setting
Must be set to 1
Initial setting
Decimal point is set
at "CALSEt"
Decimal point is set
at "CALSEt"
Output current
20m A
b
4m A
F32 a
F33 b F32 b
16. 4-20mA Analog Output (OP-07)
3
FG
a
F33 a
Weight