Function Keys F1 And F2 - AND Weighing Indicator AD-4406 OP03 Instruction Manual

7.

Function keys F1 and F2

For easier use, select functions of the F1 key and/or the F2 key and prioritize
them in function settings.
Functions that can be set are as follows:
"Print 1" or "Print 2" for serial data output in either format 1 or 2
"Add"
"totAL"
"SEt Pt" for setting the code memory number and compared data
"StArt"
"StoP"
"bU oFF" for stopping the sound of the comparison buzzer
"Unit"
"HoLd"
The function set as first priority will operated when the F1 or F2 key is released
and the functions of other priority, by pressing either the F1 or F2 key for more
than 2 seconds. For further details, refer to each item's description.
Also, regardless of the function settings above, by pressing both the F1 and F2
keys or pressing one key while holding the other key, the following functions can
be done.
F1 + F2
F1 + NET/GROSS
F2 + NET/GROSS
F2 + TARE
F2 + ON/OFF
7. Function keys F1 and F2
for addition
for display of accumulated data
for starting comparison or batch weighing
for stopping comparison or forced termination of batch weighing
for changing the unit
for starting the average or releasing the hold data
Entering function settings
Displaying the accumulated data
Displaying and setting data number
Starting batch-weighing
Changing the unit
Page 30
AD-4406 Weighing Indicator