Commands To Set Serial Data Output Format (Ufc); Ufc Command - AND Weighing Indicator AD-4406 OP03 Instruction Manual

Request Hold State
When receiving this command, returns the average/hold state immediately.
Template
Command
Reply

13.3.5. Commands to Set Serial Data Output Format (UFC)

Set Serial Data Format
Sets the serial output data format.
Format 1 data is stored in the same memory area of F34 and format 2 data is stored
in the same memory area of F35.
Template
Command
Reply

13.4. UFC Command

UFC (Universal Flexi Coms) function enables editing the serial data output format
freely using the serial interface command.
For customizing the print out of the printer or efficient data collection.
Output data is not only the indicator's data/status, but also the characters at will.
It can output the control code* of the printer. (* depends on individual printer)
There are 2 sets of memories for storing the parameters.
UFC Command Parameter
UFC commands such as SF1 have many parameters.
One command line can have multiple parameters. The parameters are stored in
memory in order.
Multiple UFC commands are possible. The parameters are stored next to the last
parameter stored by the last UFC command.
Clear all of the data first, if storing a new set of parameters. The parameters in
the stored data can not be changed partially.
The various types of parameters and their descriptions are shown on the
following page.
13.4. UFC Command
HD
H D
Not hold nor averaging
H D , 0
Averaging now
H D , 1
Hold
H D , 2
SFf, [ parameters ]
f: Format number, 1 or 2
S F 1 , $ G R
S F 1 , $ G R
Page 50
AD-4406 Weighing Indicator