Exercising The System Using Sunvts Software - Fujitsu SPARC Enterprise T2000 Service Manual

Fujitsu server user manual
Hide thumbs Also See for SPARC Enterprise T2000:
Table of Contents

Advertisement

If SunVTS software is not installed, you see an error message for each missing
package.
ERROR: information for "SUNWvts" was not found
ERROR: information for "SUNWvtsr" was not found
...
If SunVTS is not installed, you can obtain the installation packages from the Solaris
Operating System DVDs
The SunVTS 6.0 PS3 software, and future compatible versions, are supported on the
server.
SunVTS installation instructions are described in the SunVTS User's Guide.
3.8.2

Exercising the System Using SunVTS Software

Before you begin, the Solaris OS must be running. You also need to ensure that
SunVTS validation test software is installed on your system. See
"Checking Whether SunVTS Software Is Installed" on page
The SunVTS installation process requires that you specify one of two security
schemes to use when running SunVTS. The security scheme you choose must be
properly configured in the Solaris OS for you to run SunVTS. For details, refer to the
SunVTS User's Guide.
SunVTS software features both character-based and graphics-based interfaces. This
procedure assumes that you are using the graphical user interface (GUI) on a system
running the Common Desktop Environment (CDE). For more information about the
character-based SunVTS TTY interface, and specifically for instructions on accessing
it by tip or telnet commands, refer to the SunVTS User's Guide.
SunVTS software can be run in several modes. This procedure assumes that you are
using the default mode.
This procedure also assumes that the server is headless. That is, it is not equipped
with a monitor capable of displaying bitmap graphics. In this case, you access the
SunVTS GUI by logging in remotely from a machine that has a graphics display.
Finally, this procedure describes how to run SunVTS tests in general. Individual tests
might presume the presence of specific hardware, or might require specific drivers,
cables, or loopback connectors. For information about test options and prerequisites,
refer to the following documentation:
SunVTS 6.3 Test Reference Manual for SPARC Platforms
SunVTS 6.3 User's Guide
3-50
SPARC Enterprise T2000 Server Service Manual • April 2007
Section 3.8.1,
3-49.

Advertisement

Table of Contents
loading

Table of Contents