Hard Drive Leds; Figure - Fujitsu SPARC Enterprise T2000 Service Manual

TABLE 3-2
LED
OverTemp
LED
3.2.2

Hard Drive LEDs

The hard drive LEDs (
drive that is installed in the server chassis.

FIGURE 3-4

TABLE 3-3
LED
OK to
Remove
Unused
Activity
Front and Rear Panel LEDs (Continued)
Color Description
Amber Provides the following operational temperature indications:
• Off – Indicates a steady state, no service action is required.
• Steady on – Indicates that a temperature failure event has been
acknowledged and a service action is required. View the ALOM
CMT reports for further information on this event.
FIGURE 3-4
Hard Drive LEDs
Hard Drive LEDs
Color Description
Blue • On – The drive is ready for hot-plug removal.
• Off – Normal operation.
Amber
Green • On – Drive is receiving power. Solidly lit if drive is idle. Flashes
while the drive processes a command.
• Off – Power is off.
and ) are located on the front of each hard
TABLE 3-3
Chapter 3 Server Diagnostics
OK to Remove
Unused
Activity
3-11