Removing The Battery On The System Controller; Replacing The Battery On The System Controller; Figure 5-27 Removing The Battery From The System Controller; Figure 5-28 Replacing The Battery In The System Controller - Fujitsu SPARC Enterprise T2000 Service Manual

8. Perform the procedures described in
Finishing Up" on page 5-41
5.2.21

Removing the Battery on the System Controller

1. Perform the procedures described in
Replacement" on page
2. Remove the system controller from the chassis
System Controller Card" on page
antistatic mat.
3. Using a small flat-head screwdriver, carefully pry the battery (
system controller.
FIGURE 5-27
5.2.22

Replacing the Battery on the System Controller

1. Unpackage the replacement battery.
2. Press the new battery into the system controller (
side (+) facing upward (away from the card).
FIGURE 5-28
5-40 SPARC Enterprise T2000 Server Service Manual • April 2007
5-1.
Removing the Battery From the System Controller
Replacing the Battery in the System Controller
Section 5.3, "Common Procedures for
Section 5.1, "Common Procedures for Parts
(Section 5.2.5, "Removing the
5-17) and place the system controller on an
FIGURE 5-28
Battery
) from the
FIGURE 5-27
) with the positive