Figure 6-4 Location Of Pci-Express And Pci-X Card Slots - Fujitsu SPARC Enterprise T2000 Service Manual

Fujitsu server user manual
Hide thumbs Also See for SPARC Enterprise T2000:
Table of Contents

Advertisement

7. Perform the procedures described in
Replacement" on page
6.2.3
PCI Express or PCI-X Card Guidelines
Follow these guidelines and
The server provides the following PCI capabilities:
Note – There are a variety of PCI-X and PCI-Express cards on the market. Read the
product documentation for your device for additional installation requirements and
instructions that are not covered here.
FIGURE 6-4
6.2.4
Adding a PCI-Express or PCI-X Card
1. Perform all of the procedures in
Replacement" on page
5-1.
3 PCI-Express (PCI-E) slots for low-profile cards (supports lane widths of x1,
x2, x4, and x8)
2 PCI-X slots for low-profile cards
Location of PCI-Express and PCI-X Card Slots
5-1.
Section 5.1, "Common Procedures for Parts
to plan your configuration:
FIGURE 6-4
PCI-E slots 0, 1, 2
Section 5.1, "Common Procedures for Parts
Chapter 6 Adding New Components and Devices
PCI-X slots 0, 1
6-7

Advertisement

Table of Contents
loading

Table of Contents