Figure 4-1 Fan Identification And Removal - Fujitsu SPARC Enterprise T2000 Service Manual

Fujitsu server user manual
Hide thumbs Also See for SPARC Enterprise T2000:
Table of Contents

Advertisement

You might need to extend the server to a maintenance position. See
"Extending the Server to the Maintenance Position" on page 5-3
FM0
LED
Fan Identification and Removal
FIGURE 4-1
2. Unpackage the replacement fan and place it near the server.
3. Lift the latch on the top of the fan door (
The fan door is spring loaded, and you must hold it in the open position.
4. Identify the faulty fan.
A lighted LED on the top of a fan indicates that the fan is faulty.
5. Pull up on the fan strap handle until the fan is removed from the fan bay.
FM2
FM1
FIGURE 4-1
Chapter 4 Replacing Hot-Swappable and Hot-Pluggable FRUs
Section 5.1.3,
Latch
Fan door
), and lift the fan door open.
4-3

Advertisement

Table of Contents
loading

Table of Contents