Disabling Components; Enabling Disabled Components - Fujitsu SPARC Enterprise T2000 Service Manual

Example showing a disabled component:
sc> showcomponent
.
.
.
ASR state:
3.7.2

Disabling Components

The disablecomponent command disables a component by adding it to the ASR
blacklist.
1. At the sc> prompt, enter the disablecomponent command
sc> disablecomponent MB/CMP0/CH3/R1/D1
SC Alert:MB/CMP0/CH3/R1/D1 disabled
2. After receiving confirmation that the disablecomponent command is complete,
reset the server so that the ASR command takes effect.
sc> reset
3.7.3

Enabling Disabled Components

The enablecomponent command enables a disabled component by removing it
from the ASR blacklist.
1. At the sc> prompt, enter the enablecomponent command.
sc> enablecomponent MB/CMP0/CH3/R1/D1
SC Alert:MB/CMP0/CH3/R1/D1 reenabled
3-48 SPARC Enterprise T2000 Server Service Manual • April 2007
Disabled Devices
MB/CMP0/CH3/R1/D1 : dimm15 deemed faulty
.