Netware - Dell 3115cn Color Laser Printer User Manual

FTP Password
Connection Time-Out
IP Filter Address
2
(IPv4) *
Address Mask
Active
Mode
1
* An optional multi-protocol card is required to display the item.
2
* This item is only available for LPD or Port9100.

NetWare

Purpose:
To configure detailed settings for IPX/SPX and NetWare.
Values:
IPX/SPX Frame
Settings Type
Current Frame Type
Network Address
NetWare Device Name *1
Active
Mode
Sets whether to enable or disable the password. And also
specifies the password value up to 7 characters.
Sets the connection timeout period from 1 to 1000 seconds.
Sets the address in the address field. Enter a numeric value
between 0 and 255 in each field of "aaa.bbb.ccc.ddd."
However, 127 and 224-254 cannot be used to "aaa."
Sets the Subnet Mask in the Mask field. Enter a numeric value
between 0 and 255 in each field.
Reject Rejects printing from specified network address.
Permit Permits printing from specified network address.
Disabled Disables the IP Filter feature for the specified IP address.
Auto Specifies the active frame type automatically.
Ethernet II Selects Ethernet II frame type.
Ethernet Selects IEEE802.3 frame type.
802.3
Ethernet Selects IEEE802.2 frame type.
802.2
Ethernet Selects SNAP (Sub Network Access Protocol) frame type.
SNAP
Displays the current frame type.
Displays the IPX network address.
Specifies the printer name up to 47 alphanumeric characters.
For PServer Mode, set the Print Server Name (Print Server Object
Name). The original setting remains valid if no input is made.
Directory: Selects this option when using in Directory: PServer Mode .
PServer
Mode