Viewing And Hiding The Hoop; Selecting A Hoop - Brother BES Lettering Instruction Manual

28 Pacesetter BES Lettering
Instruction Manual

Viewing and Hiding the Hoop

Use the Hoop
window. Just click on the Hoop tool to show the hoop (if it is not
currently shown) and click it again to hide the hoop.
The hoop's dimensions are determined by your settings under
the Hoops dialog in Pacesetter BES Lettering.
Using the Hoop tool may effect the magnification level of your
design. For example, if you are zoomed in on the design,
clicking the Hoop tool will cause the view to zoom out enough to
fit the entire hoop into the workspace.

Selecting a Hoop

You can select one of the pre-loaded hoops using the Hoops
dialog. You will notice that you can select hoops from different
file types in this dialog. This is useful when you want to make
sure that your design will fit for more than one kind of
embroidery machine.
To select a hoop using the Hoops dialog:
1 On the Home Tab click the down arrow under the Hoop tool.
2 From the menu that appears, click on Select Hoop.
You see the Hoops dialog.
tool to show and hide the hoop in the display