Drawing A Rectangle - Brother Quattro 2 6700D Operation Manual

22

10. Drawing a Rectangle

1
Press so that it changes to
2
From a point that will be a corner of the rectangle,
drag the pen along the screen until the rectangle is
the desired size.
3
When the rectangle is the desired size, remove the
pen from the screen. This completes the drawing.
To draw a rectangle or square
1
1
2
The size can be adjusted as desired until the pen is
removed from the screen.
.
Use to draw
rectangles. The rectangle
is drawn with the line
connecting the starting
point and the ending point
as the diagonal.
* An angled rectangle, like
the one shown at
the right,
cannot be
drawn.
2
1 Starting point
2 Ending point
Use to draw squares.
The square is drawn with
all sides having the length
of the longest side of a
rectangle whose diagonal
is a line connecting the
starting point and the
ending point.
* An angled square, like the
one shown at the
right, cannot be
drawn.
1 Starting point
2 Ending point