Workspace Viewing Tools; Pan Tool; Zoom Tool; Fit To Screen - Brother MacBroidery„ Embroidery Lettering Software for Mac Instruction Manual

14 MacBroidery™ Embroidery Lettering Software
You can navigate through the design using the controls on Redraw bar,
as follows:
Press:
Right arrow
Left arrow
+ sign
- sign

Workspace Viewing tools

The viewing tools are located on the Toolbar, which is located along
the top of the of the workspace window. Use these tools to change
your view of the design in the Workspace view.

Pan Tool

Sometimes you may want to work at a high level of magnification; in
these cases, the design may not fit in the workspace. In these
situations, use the Pan
• To use panning, select the Pan tool, and click and drag the mouse
in the workspace.

Zoom Tool

U
se Zoom to magnify or reduce parts of your design. When you select
Zoom, the cursor changes to a small magnifying glass
Zoom tool, click in the workspace to zoom in, or click and drag to
select the area that you would like to zoom in on.

Fit to Screen

The Fit to screen tool an entire design and fill the maximum size
of the design window.
To do the following:
Move forward by one stitch
Move back by one stitch
Move forward by one color
Move backward by one color
tool to change your view of the project.
. To use the