For Usb Interface Cable Users (For Mac Os 8.6 To 9.2 Users) - Brother DCP 8040 - B/W Laser - All-in-One Service Manual

3.2.5 For USB Interface Cable Users (For Mac
(1) Switch off and unplug the machine from the AC outlet and disconnect it from your
Macintosh if you already connected an interface cable.
(2) Turn on your Macintosh
(3) Insert the supplied CD-ROM for the operating system you are using into your CD-ROM
drive.
(4) Double-click the Start Here! icon to install the printer, scanner and PC-FAX Send
drivers. If the language screen appears, select your language.
(5) Click MFL-Pro Suite for your country to install.
(6) After the installation is completed, restart your Macintosh
(7) Connect the USB interface cable to your Macintosh
Caution
Do not connect the machine to a USB port on a keyboard or a non powered USB hub.
(8) Turn on the machine by plugging in the power cord. Turn the power switch on.
(9) From the Apple
(10) Click the Brother Laser icon you installed.
On the right side of the Chooser, select the printer to which you want to print.
Close the Chooser.
OK:
The Brother PC-FAX Send, Printer and Scanner drivers have been installed.
(11) To install Presto! Page Manager, click the Presto! PageManager icon and follow on the
Screen instructions.
NOTE:
You can easily scan, share and organize photos and documents using Presto! PageManager
OK:
Presto! PageManager
®
®
.
®
menu, open the Chooser.
®
has been installed and the installation is now complete.
2-23
MFC-8440/8840D/8840DN, DCP-8040/8045D/8045DN
OS 8.6 to 9.2 Users)
®
.
®
, and then connect it to the machine.
SERVICE MANUAL
®
.