Brother DCP 8040 - B/W Laser - All-in-One Service Manual page 96

NOTE:
Set pressure roller, and assemble pressure roller spring after assembling DX roller holder.
Tray feed ZL2
(4) Remove the two bind B M3x8 Taptite screws, and then remove the guide plate stopper.
(5) Remove the two left guide spring 2.
Guide plate stopper
Left guide spring 2
Tray feed ZL2
MFC-8440/8840D/8840DN, DCP-8040/8045D/8045DN
Pressure roller spring
Pressure roller
Fig. 4-23
Taptite, bind B M3x8
Guide plate stopper
Taptite, bind B M3x8
Left guide spring 2
Fig. 4-24
4-15
SERVICE MANUAL
Left guide spring 2