Brother DCP 8040 - B/W Laser - All-in-One Service Manual page 101

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(4) Remove the two bind B M4x12 Taptite screws, and then remove the document cover.
Taptite, bind B
M4x12
(5) Remove the hinge base R.
(6) Remove the three cup B M3x10 Taptite screws, and then remove the hinge arm R.
(7) Remove the three cup B M3x10 Taptite screws, and then remove the hinge ASSY L.
Taptite, cup B M3x10
Hinge ASSY L
Document cover LGL
2
Fig. 4-32
Taptite, cup B M3x10
Hinge arm R
Hinge base R
Hinge arm R
Fig. 4-33
4-20
Document cover
1
Hinge base R
Taptite, cup B M3x10