Brother DCP 8040 - B/W Laser - All-in-One Service Manual page 91

Service manual
Hide thumbs Also See for DCP 8040 - B/W Laser - All-in-One:
Table of Contents

Advertisement

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
NOTE:
When re-assembling the pressure plate ASSY, ensure that the paper indicator arm is under the
pressure plate.
!
CAUTION:
When unhooking the catches to remove the pressure plate, do not bend the pressure plate,
gently ease the plastic cover. If the pressure plate is deformed, paper feeding problems may
occur.
(17) Remove the herical extension spring.
(18) Remove the lock lever.
Paper tray
Herical extension spring
1
2
Lock lever
3
Lock lever
Paper tray
Fig. 4-15
NOTE:
When re-assembling the lock lever, insert it upwards from underneath the cassette and rotate
it until the two catches lock into place.
4-10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc8440Mfc8840dMfc8840dnDcp8040Dcp8045dDcp8045dn

Table of Contents