Frame L / Drive Unit - Brother DCP 8040 - B/W Laser - All-in-One Service Manual

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
3.29

Frame L / Drive Unit

(1) Remove the main PCB sheet from the frame L.
(2) Remove the four bind B M4x12 Taptite screws.
(3) Remove the two bind B M3x10 Taptite screws, and then remove the frame L.
Taptite, bind B M4x12
Main PCB
sheet
(4) Remove the back up plate ground spring. (DCP-8040/MFC-8440 only)
Under bar
Taptite, bind B M3x10
Taptite, bind B M4x12
Drive unit
Back up plate
ground spring
Frame L
Taptite, bind B M3x10
Fig. 4-140
Fig. 4-141
4-78
Under bar
Frame L