Brother DCP 8040 - B/W Laser - All-in-One Service Manual page 136

NOTE:
When re-assembling the thermistor to the FU frame upper, ensure the direction of the
thermistor is correct referring to the figure below;
FU frame upper
(8) Remove the two cup B M3x20 Taptite screws.
(9) Remove the FU frame upper from the FU frame lower.
FU frame lower
Hook
Pin
Hook
Taptite, cup B M3x20
Thermistor
Taptite, cup B M3x12
Fig. 4-98
Hook
Fig. 4-99
4-55
MFC-8440/8840D/8840DN, DCP-8040/8045D/8045DN
Thermistor
Pin
Taptite, cup B M3x20
FU frame upper
SERVICE MANUAL
Hook