Brother DCP 8040 - B/W Laser - All-in-One Service Manual page 131

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(12) Open the MP chute ASSY cover.
(13) Remove the MP-PE actuator.
(14) Remove the four bind B M4x12 Taptite screws, and then remove the MP chute ASSY.
MP-PE actuator
Fig. 4-88
Taptite, bind B M4x12
Fig. 4-89
4-50
MP chute ASSY
Taptite, bind B M4x12
MP chute ASSY