Brother DCP 8040 - B/W Laser - All-in-One Service Manual page 157

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(26) Remove the hook of the bearing 5, and then slide the feed roller ASSY in the direction of
the arrow.
(27) Remove the feed roller ASSY.
(28) Remove the joint 5 and the bearing 5 from the feed roller ASSY.
Joint 5
NOTE:
Be careful that the different direction installation causes jam when you install joint 5.
Joint 5
Feed roller ASSY
5
4
3
2
1
Fig. 4-135
Fig. 4-136
4-76
Bearing 5
Hook
Bearing 5