Base Plate / Lv Insulation Sheet - Brother DCP 8040 - B/W Laser - All-in-One Service Manual

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
3.23

Base Plate / LV Insulation Sheet

(1) Remove the eight bind B M4x12 Taptite screws.
(2) Remove the four cup S M3x6 Taptite screws.
(3) Remove the pan (washer) M3.5x6 Taptite screw, and then remove the ground wire.
(4) Remove the base plate.
Taptite, bind B M4x12
Taptite, cup S M3x6
Ground wire
Screw, pan
(washer) M3.5x6
(5) Remove the two bind B M4x12 Taptite screws, and then remove the LV insulation sheet 1,
2, 3.
LV insulation sheet 3
Taptite, bind B M4x12
LV insulation sheet 2
Fig. 4-117
Taptite, bind B M4x12
Fig. 4-118
4-66
Taptite, cup S M3x6
Taptite, bind B M4x12
Base plate
LV insulation sheet 1