Brother DCP 8040 - B/W Laser - All-in-One Service Manual page 40

CHAPTER 2 INSTALLATION AND BASIC OPERATION
< For Windows
Make sure that you followed the instructions in (1) to (16) on
(17) When this screen appears, connect the USB interface cable to your PC, and then
connect it to the machine.
Turn on the machine by plugging in the power cord. Turn the power switch on.
It will take a few seconds for the installation screen to appear.
The installation of the Brother drivers will automatically start. Follow the instructions on
the screen.
(18) If the Digital Signature Not Found dialog boxes appear, click Yes to install the driver.
(19) The README.WRI file will be displayed.
Please read this file for troubleshooting information and then close the file to continue
installation.
(20) Click Finish to restart your computer.
(21) After the computer restarts, click Yes to have the Control Center load each time
Windows
If you click No the Scan keys on the machine will be disabled.
NOTE:
Even if you select NO, later you will be able to launch the Brother Control Center to use the
Scan to key by double clicking the Smart UI icon on the desktop. This loads the Brother
Control Center to the task tray. See AutoLoad the Brother Control Center, Chapter 15 in the
Documentation (User's Guide) located on the CD-ROM.
OK:
This completes the installation of the Windows
the Brother PC-FAX and scanner drivers.
Brother also offers a Native Driver on the CD-ROM. The Brother Native Driver offers
some features that are not available with the Windows
the Brother Native driver proceed to step (22).
Brother Native driver Installation
(22) Click Start and select Settings and then Pointers. Click on Add a printer and the Add
Printer Wizard will start.
When this screen appears, click Next.
(23) Un-check the Automatically detect and install my Plug and Play printer selection
and then click Next.
(24) Select USBXXX from the pull down window for the Printer Port Selection and then click
Next.
(25) Click on Have Disk.
(26) Browse the CD-ROM for the W2K folder.
Highlight the W2K folder and click Open.
Highlight the Addprt folder and click Open.
(27) Click Open.
®
2000 Professional Users Only >
®
is started. The Control Center will appear as an icon in the task tray.
pages 2-8 to
®
Logo Tested (WHQL) printer driver and
®
Logo Tested Driver. To install
2-10
2-9.