Brother DCP 8040 - B/W Laser - All-in-One Service Manual page 105

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(19) Remove the cup S M3x6 Taptite screw, and then remove the ADF relay PCB ASSY.
(20) Remove the three cup S M3x6 Taptite screws, and then remove the motor frame ASSY.
(21) Remove the two pan (S/P washer) M3x8 screws, and then remove the ADF motor.
Pan (S/P washer)
M3x8
ADF motor
Taptite, cup S M3x6
(22) Remove the four cup B M3x10 Taptite screws, and then remove the paper feed chute
ASSY.
Paper feed chute ASSY
Taptite, cup S M3x6
Taptite, cup B M3x10
PF roller holder ASSY
Fig. 4-40
Fig. 4-41
4-24
Taptite, cup S M3x6
ADF relay PCB ASSY
Motor frame ASSY
ADF chute ASSY
Taptite, cup B M3x10