System-Board Leds - Lenovo ThinkServer TD200 Installation And User Manual

Important:
1. Before you change any switch settings or move any jumpers, turn off the server,
2. Any system-board switch blocks or jumpers that are not shown in the

System-board LEDs

The following illustration shows the light-emitting diodes (LEDs) on the system
board.
then, disconnect all power cords and external cables. Read the safety
information (see "Safety" on page vii, "Handling static-sensitive devices" on
page 39, and "Working inside the server with the power on" on page 38).
illustrations in this document are reserved.
Chapter 4. Server controls, LEDs, and power
33