Installing A Hot-Swap Fan - Lenovo ThinkServer TD200 Installation And User Manual

4. If you are instructed to return the hot-swap fan, follow all packaging instructions,

Installing a hot-swap fan

Attention:
v Replace a hot-swap fan within 30 seconds of removal.
v To ensure proper cooling and airflow, do not operate the server for more than 2
To install a hot-swap fan, do the following:
1. Touch the static-protective package that contains the hot-swap fan to any
2. Align the fan 1 over the fan slot and lower fan into the slot in the fan cage
and use any packaging materials that are supplied to you for shipping.
minutes with the side cover removed.
unpainted metal surface on the server; then, remove the fan from the package
and place it on a static-protective surface.
assembly.
Chapter 5. Installing optional devices and replacing customer replaceable units
85