Lenovo ThinkServer TD200 Installation And User Manual page 125

1
ServeRAID-BR10i controller
2
PCI slot 1
8. Press the ServeRAID-BR10i adapter firmly into the connector on the system
board.
9. Rotate the power-supply cage assembly out of the chassis. Lift up the
power-supply cage handle and pull the power-supply cage assembly all the
way up until the retainer latch locks the cage in place on the chassis.
1
Power supply
2
Power-supply handle
10. Remove the air baffle (see "Removing the air baffle" on page 44).
Chapter 5. Installing optional devices and replacing customer replaceable units
107