Lenovo ThinkServer TD200 Installation And User Manual page 112

10. Install the air baffle (see "Installing the air baffle" on page 132).
11. Rotate the power-supply cage assembly back into the server. Press the
94
ThinkServer TD200 Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836: Installation and User Guide
8. Turn the DIMM so that the DIMM keys align correctly with the connector.
1
DIMM
2
Retaining clip
9. Insert the DIMM into the connector by aligning the edges of the DIMM with the
slots at the ends of the DIMM connector. Firmly press the DIMM straight down
into the connector by applying pressure on both ends of the DIMM
simultaneously. The retaining clips snap into the locked position when the
DIMM is firmly seated in the connector. If there is a gap between the DIMM
and the retaining clips, the DIMM has not been correctly installed. Open the
retaining clips, remove the DIMM, and then reinsert it.
power-supply cage release tab and rotate the power-supply cage assembly
into the chassis.