Removing A Dvd Drive - Lenovo ThinkServer TD200 Installation And User Manual

The following notes describe the types of drives that the server supports and other
information that you must consider when installing a drive:
v Make sure that you have all the cables and other equipment that is specified in
v Check the instructions that come with the drive to see whether you have to set
v Optional external tape drives and DVD-ROM drives are examples of
v To install a 3.5-in. drive in a 5.25-in. bay, you must use a 5.25-in. conversion kit.
v The electromagnetic interference (EMI) integrity and cooling of the server are
v For a complete list of supported options for the server, see http://

Removing a DVD drive

To remove a DVD drive, do the following:
1
Bay 1
2
Bay 2
3
Bay 3
4
Bay 4
5
Bay 5
6
Bay 6
7
Bay 7
the documentation that comes with the drive.
any switches or jumpers on the drive. If you are installing a SAS or SATA device,
be sure to set the SAS or SATA ID for that device.
removable-media drives. You can install removable-media drives only in bays 1,
2, and 3.
protected by having all bays and PCI slots covered or occupied. When you install
a drive or PCI adapter, save the EMC shield and filler panel from the bay or the
PCI adapter slot cover in the event that you later remove the drive or adapter.
www.lenovo.com/thinkserver.
Chapter 5. Installing optional devices and replacing customer replaceable units
59