Cfgipv6Dnsserversfromdhcp6 (Read/Write); Cfgipv6Dnsserver1 (Read/Write); Cfgipv6Dnsserver2 (Read/Write) - Dell PowerEdge VRTX Reference Manual
Chassis management controller version 1.0 for dell poweredge vrtx racadm command line reference
Hide thumbs
Also See for PowerEdge VRTX:
- Reference manual (931 pages) ,
- User manual (193 pages) ,
- Owner's manual (159 pages)
Table of Contents
Advertisement
cfgIPv6DNSServersFromDHCP6 (Read/Write)
Description
Legal Values
Default
cfgIPv6DNSServer1 (Read/Write)
Description
Legal Values
Default
cfgIPv6DNSServer2 (Read/Write)
Description
Legal Values
Default
Example
$ racadm getconfig -g cfgIPv6LanNetworking
cfgIPv6Enable=1
cfgIPv6AutoConfig=1
cfgIPv6Address=::
cfgIPv6PrefixLength=64
cfgIPv6Gateway=::
cfgIPv6DNSServersFromDHCP6=1
cfgIPv6DNSServer1=::
cfgIPv6DNSServer2=::
Specifies whether cfgIPv6DNSServer1 and
cfgIPv6DNSServer2 are static or DHCP IPv6 addresses.
1 (TRUE) 0 (FALSE)
1
Specifies the IPv6 DNS server address.
A string representing a valid IPv6 entry. For example,
2001:DB8:1234:5678:9ABC:DE11:C00C:BEEF
::
Specifies the IPv6 DNS server address.
NOTE: This property is only valid if cfgIPv6DNSServersFromDHCP6 is set to
0 (false).
A string representing a valid IPv6 entry. For example,
2001:DB8:1234:5678:9ABC:DE11:C00C:BEEF
::
NOTE: This property is used only if cfgIPv6AutoConfig
is set to 1 (true).
NOTE: This property is used only if
cfgIPv6DNSServersFromDHCP6 is set to 0 (false).
147
Advertisement
Table of Contents
