Feature; Featurecard - Dell PowerEdge VRTX Reference Manual

feature

Description Displays all active chassis features. The information displayed includes feature name, date activated,
and the serial number of the SD card used to activate the feature.
Dell Feature Cards may contain more than one feature.
NOTE: To use this subcommand to deactivate FlexAddress or ExtendedStorage, you must have
the Chassis Configuration Administrator privilege. A user with login privileges can view status
only.
NOTE: To deactivate FlexAddress features, the chassis must be turned off.
Synopsis
•
•
•
Input
•
•
NOTE: When the FlexAddress and FlexAddressPlus features are active, deactivating one of them
results in deactivation of the other feature also. However, ExtendedStorage is not affected by the
deactivation of FlexAddress or FlexAddresPlus.
•
NOTE: The –r switch requires that the ExtendedStorage feature be deactivated.
CAUTION: Using the -r switch reformats the SD media in the active CMC cardslot. Any existing
ExtendedStorage data will be lost.
•
•
•

featurecard

Description
Synopsis
Input
• Increases fan speed by 50% of fan's maximum speed. Minimum speed for fan is
65% of the maximum.
racadm fanoffset -s medium
• Sets fans to run at 100% of fan's maximum speed.
racadm fanoffset -s high
racadm feature -s
racadm feature -d -c <featurename>
racadm feature -r -c ExtendedStorage
-s — Displays the status of active features.
-d — Deactivates the feature specified in -c option.
-r — Repair damaged/unformatted ExtendedStorage media.
-c — <featurename> must be one of the following:
flexaddress (with -d)
flexaddressplus (with -d) ExtendedStorage (with -d or -r)
Verifies proper SD card installation and displays the SD
card status.
To use this subcommand, you must have the Chassis
Configuration Administrator privilege.
racadm featurecard -s
-s — Lists active SD card features and SD card status.
31