Cfgserialbaudrate (Read/Write); Cfgserialconsoleenable (Read/Write); Cfgserialconsoleidletimeout (Read/Write); Cfgserialconsolenoauth (Read/Write) - Dell PowerEdge VRTX Reference Manual
Chassis management controller version 1.0 for dell poweredge vrtx racadm command line reference
Hide thumbs
Also See for PowerEdge VRTX:
- Reference manual (931 pages) ,
- User manual (193 pages) ,
- Owner's manual (159 pages)
Table of Contents
Advertisement
cfgSerialBaudRate (Read/Write)
Description
Legal Values
Default
cfgSerialConsoleEnable (Read/Write)
Description
Legal Values
Default
cfgSerialConsoleIdleTimeout (Read/Write)
Description
Legal Values
Default
cfgSerialConsoleNoAuth (Read/Write)
Description
Legal Values
Default
cfgSerialConsoleCommand (Read/Write)
Description
Legal Values
Default
114
Enables or disables the RAC or CMC serial console interface.
•
1 (TRUE)
•
0 (FALSE)
1
Sets the baud rate on the serial port.
2400, 4800, 9600, 19200, 28800, 38400, 57600,115200
115200
The maximum number of seconds to wait before an idle
serial session is disconnected.
•
0 = No timeout
•
60 – 1920
1800
Enables or disables the RAC or CMC serial console login
authentication.
•
0 (enables serial login authentication)
•
1 (disables serial login authentication)
0
Specifies a serial command that is executed after a user
logs into the serial console interface.
A string representing a valid serial command. For
example, connect server-1.
blank >
<
Advertisement
Table of Contents
