Cfgchassisinpowerserverallocation (Read Only); Cfgchassisinfrastructureinpowerallocation (Read Only); Cfgchassistotalinpoweravailable (Read Only); Cfgchassisstandbyinpowercapacity (Read Only) - Dell PowerEdge VRTX Reference Manual
Chassis management controller version 1.0 for dell poweredge vrtx racadm command line reference
Hide thumbs
Also See for PowerEdge VRTX:
- Reference manual (931 pages) ,
- User manual (193 pages) ,
- Owner's manual (159 pages)
Table of Contents
Advertisement
cfgChassisInPowerServerAllocation (Read Only)
Description
Legal Values
Default
cfgChassisInfrastructureInPowerAllocation (Read Only)
Description
Legal Values
Default
cfgChassisTotalInPowerAvailable (Read Only)
Description
Legal Values
Default
cfgChassisStandbyInPowerCapacity (Read Only)
Description
Legal Values
Default
cfgChassisPowerClear (Write Only)
Description
Legal Values
Default
cfgChassisPowerClearTimestamp (Read Only)
Description
Legal Values
Default
Indicates (in Watt) the cumulative power allocated to servers. There is no default as
this parameter is very specific to the particular customer configuration.
None
None
Indicates the estimated cumulative DC output power consumption (in watts),
determined from a field replaceable unit (FRU) on the hardware modules in the chassis.
None
None
Indicates the amount of power (in Watt) available for use by the chassis.
None
None
Indicates the amount of power (in Watt) available for turning on any hardware
modules that are either added to the chassis or if they are already present in the
chassis.
None
None
Resets cfgChassisMinPower and cfgChassisMaxPowerCapacity, when set to 1.
None
None
Time stamp when cfgChassisMinPower and cfgChassisMaxPowerCapacity were
reset.
None
None
141
Advertisement
Table of Contents
