Testfeature - Dell PowerEdge VRTX Reference Manual

Output
Example

testfeature

The following tables describe the testfeature subcommand options.
Option
<feature>
-f
username >
-u <
password >
-p <
bitmask >
-d <
testfeature -f ad
Description
94
Success: Test e-mail sent successfully
Failure: Unable to send test e-mail
Commands for the cfgEmailAlert group:
• Enable the alert —
racadm config -g cfgEmailAlert -o
cfgEmailAlertEnable -i 1
• Set the destination e-mail address —
racadm config -g cfgEmailAlert -o
cfgEmailAlertAddress -i 1 user1@mycompany.com
• Set the custom message that is sent to the destination e-mail address —
racadm config -g cfgEmailAlert -o
cfgEmailAlertCustomMsg -i 1 "This is a test!"
• Make sure that the SMTP IP address is configured properly —
racadm config -g cfgRemoteHosts -o
cfgRhostsSmtpServerIpAddr 192.168.0.152
• View the current e-mail alert settings —
racadm getconfig -g cfgEmailAlert -i <index>
index > is a number from 1 to 4.
where <
Description
Specifies the feature name. testfeature supports the
following features:
• ad — Tests Active Directory configuration using
simple authentication (user name and password).
• adkrb — Tests Active Directory configuration
using the Kerberos authentication.
• ldap — Tests LDAP configuration and operation
(requires user name and password).
The user name specified in an appropriate format for the
selected authentication method. That is, Active Directory
users are specified as user_name@domain_name.
The password for the indicated user account.
A bitmask (specified as a hexadecimal value) to select
various diagnostic messaging levels. This option is
optional.
NOTE: -d option is not supported with the remote
racadm interface.
Tests Active Directory configuration using simple
authentication (user name and password). Use the