Chassisaction; Closessn - Dell PowerEdge VRTX Reference Manual

chassisaction

Description
Synopsis
Input
Output
Example

closessn

Description
Synopsis
Input
24
Executes a power action on the chassis or a server.
To use this subcommand, you must have the Chassis
Control Administrator privilege.
racadm chassisaction [-m <module>]
<action>
module > — Module on which you want to
• -m <
carry out the action. Values are:
– chassis - this is the default value, if -m is
not specified.
– switch-n, where n=1
• < action > — Action that you want to execute on
the specified module. Values are:
– powerdown — (Chassis only) Turns off
the chassis.
– powerup — (Chassis only) Turns on the
chassis.
– powercycle — Power cycles the module.
– nongraceshutdown — (Chassis only)
Non-gracefully turns off the chassis.
– reset — Performs a hard reset of the
module.
module > = switch, < action > must be powercycle
When <
or reset.
None
Perform a reset of switch-1:
racadm chassisaction -m switch-1 reset
Module power operation successful.
Closes a communication session on the device. Use the
getssninfo command to view a list of sessions that
can be closed using this command.
To use this subcommand, you must have the Administrator
privilege.
•
racadm closessn –i <session id>
•
racadm closessn -a
•
racadm closessn -u <username>
session id > — The session ID of the session to
• -i<
be ended, which can be retrieved using RACADM
getssninfo subcommand.